FRESH AIR PURIFIER W400

$7,300.00

In stock

Installation Fee : HK$900

Model W400 Fresh AirFlow Purifier is window-mounted. It is small and compact even smaller than the smallest air conditioner. Suitable for installation for most homes, classrooms, offices, clinics and shops.

In stock

SKU: W400 Category: Tag:

Specifications

Weight 17 kg
Dimensions 280 × 400 × 600 mm
Colour

White (custom colour – optional)

Control

Touch On/Off, Ultra Red Light Remote Control

Display

LED

CADR (Clean Air Deliver Rate)

330 cubic meters per hour

Living Area

60 square meters

Automated Control

By sensor (F320/F370/W400/C370)

Manual Control

On/Off by remote control

Noise

25/55 DBA measured at 2 meters

Power Cable

1.8 meter (white)

Power Supply

AC220-240 50-60 HZ

Power Watts

F320/F370/C370/W400

AIRO2 Filter Prices

W400 Filters

AIRO2 Filter Life Time

AIRO2 Filter Life Time

Warranty

3 years complimentary warranty (parts and labour)

Refund Policy

100% refund on air purifier if not satisfied within 30 days (not including filters and installation charge)

For Schools

Committed Performance

Ventilation Standard (ASHRAE standard)
Maintain Indoor CO2 Concentration under 1000 ppm
Purification Standard (WHO standard) Maintain indoor air PM2.5 under 10 ug/m3
For proposed purchase of 10 air purifiers and above one air purifier is provided for 30 Days Performance Free Trial

Procedure to Switch ON/OFF Unit

  1. Connect the air purifier to power supply AC 220/240 / V 50-60 HZ
  2. On/Off control : Press the RED POWER KEY on the LED remote control or press the POWER KEY (at bottom right corner) on the LED display panel.
  3. Press the up and down ARROW KEY on the LED remote control to achieve fan speed 1 t0 5.
  4. Speed number is shown at the bottom of the LED display panel.

Automatic Control

  1. When relative humidity is above 80%, High Humidity Mode light (under RH) will be ON and relative humidity will automatically maintain under 80%.
  2. When incoming air temperature is under 18C, Low Temperature Mode light (under C) will be ON and incoming purified air temperature will automatically maintain at about 20C.

Manual Warm Air Control Mode

  1. Press the M key on the LED remote control to activate heater from 0 to 4 to raise incoming purified air temperature up to about 30C.
  2. Manual Warm Air Control Mode will be denied when incoming purified air temperature is 28C or above.

Manual Air Conditioning Adaptation Mode

Press AC when air conditioner is ON to activate Air Conditioning Adaptation Mode.

Filters Clogging Indicator

When the small ball at the bottom of the LED display panel retreats behind the original position (same fan speed with new filters) indicates time for change of filters.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.