Installation Fee: HK$1,500 (for window size less than 60cmx120cm)
Model F320 Fresh AirFlow Purifier is floor standing installation with base takes up less than one square foot on floor.
FRESH AIR PURIFIER F320
$6,800.00
Specifications
| Weight | 14 kg |
|---|---|
| Dimensions | 320 × 320 × 570 mm |
| Colour | White (custom colour – optional) |
| Control | Touch On/Off, Ultra Red Light Remote Control |
| Display | LED |
| CADR (Clean Air Deliver Rate) | 330 cubic meters per hour |
| Living Area | 60 square meters |
| Automated Control | By sensor (F320/F370/W400/C370) |
| Manual Control | On/Off by remote control |
| Noise | 25/55 DBA measured at 2 meters |
| Power Cable | 1.8 meter (white) |
| Power Supply | AC220-240 50-60 HZ |
| Power Watts | F320/F370/C370/W400 |
| AIRO2 Filter Prices | F320 Filters |
| AIRO2 Filter Life Time | AIRO2 Filter Life Time |
| Warranty | 3 years complimentary warranty (parts and labour) |
| Refund Policy | 100% refund on air purifier if not satisfied within 30 days (not including filters and installation charge) |
Committed Performance
Ventilation Standard (ASHRAE standard)
Maintain Indoor CO2 Concentration under 1000 ppm
Purification Standard (WHO standard) Maintain indoor air PM2.5 under 10 ug/m3
For proposed purchase of 10 air purifiers and above one air purifier is provided for 30 Days Performance Free Trial
Procedure to Switch ON/OFF Unit
- Connect the air purifier to power supply AC 220/240 / V 50-60 HZ
- On/Off control : Press the RED POWER KEY on the LED remote control or press the POWER KEY (at bottom right corner) on the LED display panel.
- Press the up and down ARROW KEY on the LED remote control to achieve fan speed 1 t0 5.
- Speed number is shown at the bottom of the LED display panel.
Automatic Control
- When relative humidity is above 80%, High Humidity Mode light (under RH) will be ON and relative humidity will automatically maintain under 80%.
- When incoming air temperature is under 18C, Low Temperature Mode light (under C) will be ON and incoming purified air temperature will automatically maintain at about 20C.
Manual Warm Air Control Mode
- Press the M key on the LED remote control to activate heater from 0 to 4 to raise incoming purified air temperature up to about 30C.
- Manual Warm Air Control Mode will be denied when incoming purified air temperature is 28C or above.
Manual Air Conditioning Adaptation Mode
Press AC when air conditioner is ON to activate Air Conditioning Adaptation Mode.
Filters Clogging Indicator
When the small ball at the bottom of the LED display panel retreats behind the original position (same fan speed with new filters) indicates time for change of filters.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.